REGULAR STOCK
SALE
AEM
$158.95
$178.95
AEM 52mm Classic Voltmeter Digital Gauge Kit - 30-4400
AEM Digital Voltmeter Gauge features a digital LED interface for voltage monitoring. The interface displays voltage in precise 1 volt increments and incorporates a sweeping LED needle along the edge that reacts to voltage changes between 8 and 18 volts. The gauge's digital readout automatically adjusts its brightness based on..
REGULAR STOCK
SALE
AEM
$105.62
$110.95
AEM Classic Digital Wideband UEGO AFR Gauge w/o Sensor - 3..
AEM Digital Wideband O2 AFR UEGO Gauge (part number 30-4110NS) combines an air/fuel ratio controller (AFR) and gauge in one unit. It offers accurate and fast AFR readings with a user-friendly digital LED display and a colored LED needle. For optimal performance, AEM recommends using the Bosch 4.9LSU sensor with..
SPECIAL ORDER
SALE
AEM
$51.20
$56.89
AEM K-Universal Stainless Tall Manifold Bung Install Kit (..
AEM's tall wideband UEGO sensor bungs are made from stainless steel and are designed for use with various AEM wideband UEGO AFR controllers. While originally intended for forced induction applications (turbo and supercharged setups) with the 4-Channel Wideband UEGO Controller, these bungs are compatible with any wideband sensor on most..
REGULAR STOCK
SALE
AEM
$14.45
$16.26
AEM Universal Stainless Tall Manifold Bung Install Kit - 3..
AEM's tall wideband UEGO sensor bungs are constructed from stainless steel for durability in exhaust environments. These bungs are designed to accommodate AEM's wideband UEGO sensors, particularly in forced induction applications when used with the 4-Channel Wideband UEGO Controller. However, their compatibility extends to any vehicle and any AEM wideband..
REGULAR STOCK
SALE
AEM
$60.71
$68.95
AEM No-Weld O2 Sensor Mount for 2.75 to 3 inch Diameter Pi..
AEM's No-Weld O2 Sensor Mounts are designed to simplify the installation of a wideband UEGO air/fuel ratio sensor in exhaust pipes. The mounts eliminate the need for welding equipment by incorporating a built-in bung. The bung acts as a threaded receptacle for the sensor. Installation necessitates only a drill and..
REGULAR STOCK
SALE
AEM
$60.71
$68.95
AEM No-Weld O2 Sensor Mount for 2.25 to 2.5 inch Diameter ..
AEM's No-Weld O2 Sensor Mounts are designed to simplify the installation of a wideband UEGO air/fuel ratio sensor in exhaust pipes. The mounts integrate a bung, which eliminates the need for welding a separate bung onto the exhaust pipe. Installation is straightforward, requiring only a drill and the hardware provided..
REGULAR STOCK
SALE
AEM
$84.65
$95.95
AEM 5 BAR Brass MAP or 75 PSIA Brass Sensor Kit & Flyi..
AEM offers brass PSIa pressure sensors in various pressure ranges including 30 psi (2 bar), 50 psi (3.5 bar), and 75 psi (5 bar). These sensors measure pressure relative to a perfect vacuum (absolute pressure), which is why they are called PSIa sensors. Unlike PSIg sensors that measure pressure relative..
REGULAR STOCK
SALE
AEM
$82.55
$92.95
AEM 3.5 BAR Brass MAP or 50 PSIA Sensor Kit & Flying L..
AEM offers brass absolute pressure sensors (PSIa) in various pressure ranges including 30 psi (2 bar), 50 psi (3.5 bar), and 75 psi (5 bar). Unlike gauge pressure sensors (PSIg) that measure pressure relative to ambient pressure, PSIa sensors measure pressure relative to a perfect vacuum (absolute zero). Because PSIa..
REGULAR STOCK
SALE
AEM
$206.95
$232.95
AEM 34 BAR MAP or 500 PSIG Stainless Steel Sensor Kit - 30..
AEM offers brass pressure sensors in three pressure ranges: 15, 100, and 150 pounds per square inch gauge (psig). These sensors measure pressure relative to atmospheric pressure, meaning they read 0 psi when exposed to air. They are commonly used for applications like monitoring oil, fuel, brake, and nitrous oxide..
REGULAR STOCK
SALE
AEM
$163.95
$184.95
AEM 3.5 BAR MAP or 50 PSIA Stainless Steel Sensor Kit - 30..
AEM's 75 PSIg pressure sensor kit featuring a stainless steel sensor body with a male 1/8" NPT thread. It includes the sensor itself, a connector, pins, and a 1/8" NPT to -4 adapter. AEM offers various PSIg stainless steel sensors in different pressure ranges to cater to specific needs. These..
REGULAR STOCK
SALE
AEM
$197.95
$222.95
AEM 139 BAR MAP or 2000 PSIG Stainless Steel Sensor Kit - ..
AEM offers stainless steel pressure sensors in various pressure ranges (100, 150, 500, 1,000, and 2,000 PSIg) for measuring pressure relative to atmospheric pressure (gauge pressure). These sensors are commonly used for monitoring oil, fuel, brake, and nitrous pressure. Choosing the right sensor depends on the level of precision required...
SALE
SOLD OUT
AEM
$51.20
$56.89
AEM K-Type Closed Tip Thermocouple Sensor Kit 0-1800F - 30..
AEM RTD-Type Temperature Sensor (PN 30-2052) is designed for accurate and durable measurement of exhaust gas temperatures (EGTs), cylinder head temperatures, and other applications. It features a closed-tip design for extended life and reduced intrusion compared to previous versions. The sensor element is protected by Inconel tubing and uses a..
REGULAR STOCK
SALE
AEM
$338.95
$381.95
AEM Universal Exhaust Back Pressure Sensor Install Kit - 3..
AEM's Exhaust Backpressure installation kit is compatible with AEM's 4-Channel Wideband UEGO Controller for accurate air/fuel ratio readings from pre-turbo mounted wideband O2 sensors. The kit enables the measurement of exhaust backpressure under extreme operating conditions while maintaining sensor durability. It includes a stainless steel pressure sensor, standoff tube, braided..
REGULAR STOCK
SALE
AEM
$158.95
$178.95
AEM RTD-Type Exhaust Gas Temperature Sensor Kit - 30-2052
AEM RTD-Type Temperature Sensor (PN 30-2052) is designed for long life and consistent temperature measurement. It features a closed-tip, platinum element for accuracy ( ±0.9% from 536 to 1,560 degrees Fahrenheit) and a wide temperature range (-40 to 1,560 degrees Fahrenheit or -40 to 850 degrees Celsius). The sensor includes..
REGULAR STOCK
SALE
AEM
$61.95
$69.95
AEM Universal 1/8in PTF Water/Coolant/Oil Temperature Sens..
AEM offers three water/oil temperature sensor kits with different thread sizes: 1/8" NPT with DTM-style connector (PN 30-2013), 1/8" NPT (PN 30-2012), and 3/8" NPT (PN 30-2011). All three kits include a temperature sensor with the corresponding thread size, a connector, and installation materials. The 30-2013 model uses a high-performance..
REGULAR STOCK
SALE
AEM
$74.35
$83.95
AEM Inlet Air Temperature Sensor Kit for EMS - 30-2010
AEM Air Inlet Temperature Sensor Kit (30-2010) is designed to measure the air temperature entering the engine. The sensor features a 3/8" NPT thread and is made from brass. The kit includes the sensor, a 3/8" NPT aluminum bung, a weatherproof connector, mating connector, pins, and wire seals. The sensor..
SPECIAL ORDER
SALE
AEM
$193.95
$218.95
AEM Universal EMS BOSCH LSU 4.2 Wideband 02 UEGO installat..
AEM Bosch LSU 4.2 Wideband UEGO sensor is accompanied by installation hardware including a weld-on bung, connector, wire seals, and pins. This sensor is designed for use in exhaust gas oxygen (UEGO) systems, which provide a wider air-fuel ratio (AFR) measurement range compared to traditional narrowband oxygen sensors. Unlike narrowband..
REGULAR STOCK
SALE
AEM
$358.95
$403.95
AEM X-Series Tru-Boost Gauge Controller Kit w/ 80PSIg Inte..
AEM Tru-BoostX Boost Controller Gauge combines a digital boost controller with a gauge for precise boost control. It features an internal MAP sensor for pressures up to 80 PSI and AEMnet data logging. Programming is done through the faceplate buttons without a laptop. It allows for two programmable boost levels..
REGULAR STOCK
SALE
AEM
$180.95
$203.95
AEM X-Series 0-160 MPH Black Bezel w/ Black Face GPS Speed..
AEM X-Series GPS Speedometer (PN 30-0313) utilizes a 10Hz GPS receiver to display ground speed, course, and altitude. This receiver collects data from multiple satellites at a rate of 10 samples per second, providing accurate and reliable readings. The included GPS receiver features a magnetic mount with an adhesive base..
REGULAR STOCK
SALE
AEM
$163.95
$184.95
AEM X-Series OBDII Gauge Kit - 30-0311
AEM X-Series OBDII gauge (PN 30-0311) retrieves data from a vehicle's OBD-II port and displays it on a large, four-digit LED screen. It can access various data channels, including engine coolant temperature, exhaust gas temperature, RPM, and manifold pressure. Users can scroll through these channels using a button on the..
Gauges are instruments that display real-time information about a vehicle's performance. They are typically mounted on the dashboard and allow drivers to monitor critical engine functions, such as coolant temperature, oil pressure, and RPMs. Upgrading to aftermarket gauges can provide more precise and comprehensive data compared to stock gauges. Additionally, they often boast a wider range of readings and customizable appearances to match a vehicle's interior.