Search Vehicle
POR-15 Top Coat DTM paint is a direct-to-metal coating suitable for prepped bare metal surfaces. It offers excellent long-lasting protection against corrosion with a moisture-resistant barrier. This UV-resistant coat can be applied directly to metal or painted surfaces, eliminating the need for primer or undercoat. It adheres well and provides additional UV protection when used over POR-15 Rust Preventive Coating.
SURFACE PREPARATION: All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint, and any other matter.
LIQUID APPLICATION:
Stir POR-15® Top Coat until all solids are dissolved before and during use; DO NOT SHAKE. Using a pouring spout, dispense a portion into a separate container and seal the can at once, keeping the lid and grooves clean. Do not paint out of the can. Follow surface prep directions. Apply POR-15® Top Coat in two to three thin covering coats. Thin with POR-15® Reducer Solvent up to 10% if necessary. Spray: Use 25-30 lbs (170Kpa-210pa) pressure for normal gloss. Roller: Use an all-purpose short nap phenolic core roller.
DRY TIME: It cures to touch in 30-60 minutes. Depending on ambient temperature and humidity, a second or third coat can be applied when the previous coat is dry; Usually after 2 hours. The second or third coats can be applied up to 72 hours after the previous coat(s). POR-15® Top Coat can take 3-4 days to reach maximum hardness, and longer in temperatures below 55°F (15°C).
CLEANUP: Do not put leftover paint back into can. Clean all equipment immediately after use with an appropriate cleaner or POR-15® Reducer Solvent. Flush out all fluid lines and carefully clean pressure pots. Use clean solvent only. It is also good practice to periodically clean the spray tip or the fluid tip/air cap combination during the course of the working day.
!