Search Vehicle
POR-15 Top Coat DTM paint is a direct-to-metal coating suitable for prepped bare metal surfaces. It offers excellent long-lasting protection against corrosion with a moisture-resistant barrier. This UV-resistant coat can be applied directly to metal or painted surfaces, eliminating the need for primer or undercoat. It adheres well and provides additional UV protection when used over POR-15 Rust Preventive Coating.
SURFACE PREPARATION: All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint, and any other matter.
AEROSOL APPLICATION:
Protect surrounding areas from spray mist. If being used to topcoat POR-15® Rust Preventive Coating, spray while POR-15® Rust Preventive Coating is dry to the touch but slightly tacky with a finger drag, normally 2 – 6 hours. If POR-15® Rust Preventive Coating has dried, wait 24 hours then lightly sand or scuff surface with pad or 220-320 sand paper. For best results, use when surface to be painted, spray can, and outside temperature, are between 60˚F and 90˚F (21˚C and 32˚C). Shake can at least one minute before and occasionally during use. Spray surface with steady, even strokes at a distance of 6 to 10 inches. Several light coats give a better finish than one heavy coat.
DRY TIME: It cures to touch in 30-60 minutes. Second coat can be applied in 1-24 hours, depending on ambient temperature and humidity. POR-15® Top Coat can take 3-4 days to reach max hardness, and longer in temperatures below 55°F (15°C).
CLEANUP: To prevent clogs in spray nozzle, hold can upside down and spray until clear gas appears. Completely empty cans may be recycled or disposed of with regular trash. Dispose of partially empty cans responsibly. DO NOT puncture, incinerate or compact.
!