Search Vehicle
POR-15 Self Etch Primer is a sprayable primer designed for quick application and fast topcoating. It bonds well to POR-15 Rust Preventive Coating, even on surfaces that have been cured for months or years. Unlike POR-15 High Build Primer, this primer is not intended for high-build applications. However, it effectively adheres to most painted surfaces and allows for topcoating within 20-30 minutes. While sanding is not required, multiple coats can be applied for additional coverage. Light sanding with 280-320 grit paper is recommended before topcoating very old POR-15 Rust Preventive Coating finishes. This product replaces Tie Coat Primer as a self-etching primer for metal surfaces.
For maximum adhesion sand surfaces to be painted with 320 grit sandpaper. All surfaces must be clean and free of all dirt, loose rust, oil, grease, wax, soap, loose paint and any other matter. Clean painted and bare metal surfaces with POR-15 Cleaner Degreaser. Metal surfaces should be treated with POR-15 Metal Prep for maximum adhesion.
Previously Painted Areas: Scuff surface with 320 grit sand paper. Use POR-15 Cleaner Degreaser and POR-15 Metal Prep. Let surface dry thoroughly.
Bare Steel or Aluminum: Clean and prep surface then let dry thoroughly.
Shake can well before spraying. Spray two light coats of POR-15 Self Etch Primer and allow 10 to 15 minutes between coats. POR-15 Self Etch Primer can be topcoated in 30 minutes. It is not necessary to sand POR-15 Self Etch Primer before topcoating.
Dry time: It cures to touch in 30-60 minutes. Second coat can be applied in 10-15 minutes, depending on ambient temperature and humidity.
Cleanup: To prevent clogs in spray nozzle, hold can upside down and spray until clear gas appears.
Empty aerosol cans are recyclable or may be discarded in regular trash pick-up. Do not incinerate or compact.
!