Water Methanol Systems

AEM V3 WMI Injector utilizes innovative Swirl Generator Technology to enhance atomization for improved inlet temperature cooling. This technology also enables efficient use of fluid by maintaining inlet air cooling with less consumption. Three Swirl Generators are included, offering flow rates of 250cc, 500cc, and 1000cc. As a direct replacement..

AEM V3 Water/Methanol HD Controller Kit is designed for vehicles with internal MAP sensor and a maximum boost pressure of 40 psi. This kit includes only the controller and harness, additional components such as injectors and hoses are sold separately. The controller relies on the vehicle's internal MAP sensor to..

AEM Water/Methanol Injection Kits are designed for forced induction gas-powered race engines. The system injects a water/methanol mixture to reduce engine inlet air temperatures and suppress detonation. This allows for increased boost pressure and ignition timing without requiring high-octane racing fuel, potentially resulting in power gains of up to 20%...

AEM Multi-Input WMI controller is designed for racers with high-performance engines seeking an alternative to traditional boost-dependent water/meth controllers. It allows for water/meth injection on both high-compression naturally aspirated (NA) engines and high-boost vehicles (above 40 psi). The controller offers multiple input options including a 0-5v external MAP sensor, frequency-based..

AEM Water/Methanol Solenoid is a normally closed solenoid valve designed for use with AEM Water/Methanol Injection Systems. It is a two-way valve with a stainless steel body and a 12-volt DC operation. The solenoid valve offers precise and reliable shut-off, preventing unintended flow even under vacuum conditions.  AEM provides a..

AEM water/methanol injection controller is designed for both high compression naturally aspirated and forced induction gas engines. It features large knobs and clear numbering for setting activation points. The controller also has a covered LED status indicator and test buttons. The included wiring harness is color-coded for simplified installation and..

AEM V2 Water/Methanol Conductive Fluid Level Sensor and Flying Lead Connector is a replacement component designed specifically for AEM V2 Water/Methanol Injection Kits. It is crucial to use this sensor with compatible AEM injection systems due to a unique thread pitch that ensures proper installation and functionality. The sensor operates..

AEM's replacement kit consists of two V3 Water/ Methanol Injectors. These injectors are designed to be compatible with existing AEM Water/Methanol Injection Systems (WMI) and can also function as an upgrade.  A key feature of this product is the inclusion of interchangeable swirl generators. These generators allow for customization of..

AEM Multi-Input Controller is a standalone unit designed for fuel injection applications. It offers a versatile input selection, allowing users to configure the controller based on their vehicle's specific needs. The controller can accept a 0-5 volt signal, MAF frequency, voltage representing injector duty cycle (IDC), or a signal from..

AEM water/methanol injection controller is designed for both high compression naturally aspirated and forced induction gas engines. It features large knobs and clear numbering for setting activation points. The controller also has a covered LED status indicator and test buttons. The included wiring harness is color-coded for simplified installation and..

AEM Water/Methannol Injection System is designed to reduce engine inlet air temperatures and suppress detonation in forced induction gas-powered race engines. This allows racers to increase boost and advance ignition timing for power gains without using high-octane racing fuel. AEM offers two controller designs for different boost levels: ·         A..

AEM offers two water/meth controllers: a boost dependent one (up to 35 PSI) for forced induction engines and a multi input one for high compression naturally aspirated and ultra-high boost vehicles (above 35 PSI). The multi input controller works with various external sensors. Both controllers feature user-friendly knobs and buttons..

AEM's recirculation-style pump designed for use in water/methanol injection systems. It has a maximum operating pressure of 200 psi and includes 3/8-inch NPT fittings to facilitate installation. Unlike older switched-style pumps, this recirculation pump offers improved performance, reliability, and quieter operation due to its internal bypass design that eliminates erratic..

AEM 30-3315 V3 Water/Methanol Injection Kit is a replacement or upgrade nozzle kit for existing water/methanol injection systems. It features interchangeable swirl generators for flow rates of 250cc, 500cc, and 1000cc, allowing customization for specific engine needs. The kit includes a complete injector assembly, T-fitting, and hose. This injector utilizes..

AEM's Methanol/Water Injection Filter is designed to safeguard the engine and the water/methanol injection system by removing contaminants as small as 40 microns from the water/methanol mixture. Installed in-line before the water/methanol pump, this filter ensures a clean flow of the water/methanol mixture throughout the system, protecting the delicate components..